We focus on providing multiple quality control services with focus on surface preparation, corrosion protection, painting inspection and welding quality management. In our team we have licensed FROSIO level 3 inspector as well as International Welding engineer. We have worked with different renowned companies such as Kon\u010dar, Framatome, Andritz and Jeumont electric, SMIT transformatoren primarily on paining inspection of metallic welded structures for both onshore and offshore projects.<\/p>\n\n\n\n\n\n\n\n
Environmental condition monitoring (dew point, humidity, temperature)<\/strong><\/p>\n\n\n\n\n\n ISO 8501-3 P1, P2, P3 Dry Film Thickness (DFT) measurements<\/strong><\/p>\n\n\n\n\n\n Establishment of surface quality according to ISO 8501-1\/2 – Surface roughness comparators<\/em> (grit or shot blast)<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n Inspection of masking and protection of surfaces that should not be coated<\/strong> such as stainless steel surfaces.<\/strong><\/p>\n\n\n\n\n\n\n\n The Bresle test is a method used to measure the amount of soluble salts (like chlorides, sulfates, and nitrates) on a metal surface before painting or coating.<\/strong><\/p>\n\n\n\n\n\n Check of (grit or shot) conductivity for presence of salts which have corrosive effect on coating substrate.<\/strong><\/p>\n\n\n\n\n\n\n\n Creating paint instructions and documentation relevant to painting.<\/strong><\/p>\n\n\n\n\n\n Check of paint validity, expiration date, batch number. Check of mixing procedure and mixing ratios.<\/strong><\/p>\n\n\n\n\n\n\n\n Check of sandblasting process and equipment, check of grit and shot granulation, check of sandblasting technique.<\/strong><\/p>\n\n\n\n\n\n Check of painting process, Wet film thickness measurmet, check of painting technique.<\/strong><\/p>\n\n\n\n\n\n Checking of packing status and signalizing readiness for shipping of big parts such as transformer tanks which weigh over 30 tonn.<\/strong><\/p>\n\n\n\n\n\n Final inspection of coating thickness, checking for coating mistakes and checking of overall part cleanliness. <\/strong><\/p>\n\n\n\n\n\n\n\n Final inspection of coating thickness, checking for coating mistakes and checking of overall part cleanliness.<\/strong><\/p>\n\n\n\n\n\n Final inspection of coating thickness, checking for coating mistakes and checking of overall part cleanliness. <\/strong><\/p>\n\n\n\n\n\n
Checking of surface quality preparation of Welds, Cut edges, Sharp corners, Irregular surfaces.<\/strong><\/p>\n\n\n\n\n\n\n\n